PS-7242I

Key Feature

• 24-Port 10/100BaseT(X) PoE + 2-Port Gigabit
• Copper and 2 SFP Combo Ports
• 19” Industrial Size
• Internal Power Supply

24-port 10/100M PoE + 2 Combo Gigabit Copper / 2 SFP Rack-mount Gigabit Ethernet Switch

Introduction

PS-7242I is 24-port 10/100M + 2 Combo Gigabit Copper / 2 SFP Rack-mount Gigabit Ethernet Switch that is designed for medium or large network environment to strengthen its network connection. Including rack-mount brackets, the 19" size fits into your rack environment. It is a superb choice to boost your network with better performance and efficiency.

2 Combo Gigabit Copper & 2 SFP Combo Ports

PS-7242I supports 2 Combo Gigabit Copper or 2 SFP open slots to uplink to servers, storage, or other switching devices for long loop reach applications

No Special Networking Cable Required

By adding PoE devices, you can use an existing standard Cat-5 Ethernet cable without a new electrical outlet for both power and data. It helps you reduce installation time and cost.

Auto-MDI/MDI-X

Every port can automatically sense your type of cable, so there is no need for crossover cables whether you are connecting this switch to another switch or to a computer.

Auto-Negotiation

Every port can automatically sense if the connected network devices are running at 10Mbps or 100Mbps and Half/Full-Duplex mode, and adjust accordingly.

Non-Blocking

This switch receives and forwards traffic seamlessly with its non-blocking wire-speed. Every port simultaneously supports up to 200Mbps of bandwidth in full-duplex mode. This feature provides full wire speed to the connected devices and allows you to run a smooth network.

Store and Forward

By this function, this switch can maximize network performance while minimizing the propagation of bad network packets.

Note: All specifications are subject to change without notice.

• Datasheet Download